24
Rinsing, Cleaning, and Draining
3. Pour 0.6 gallons of clean water into the
cold tank. (The cold water tank is the open
cylinder that the white cover was removed
from).
4. Place a large bucket beneath the
upper Drain Outlet (#18) located on the
back of the unit. Remove the drain cover
and allow the water to drain from the
unit. Water will start flowing as soon as
the drain cover is removed.
Caution: The dispenser will heat water to a temperature of approximately 185°F.
It can cause severe burns if not handled carefully. Please use caution while operating
and cleaning. Please allow ample time for any hot water inside the machine to cool
down before draining it.
Cleaning
English
To Next Page
Loading...
