Avalon Astoria - Start-Up, Fan Speed, and Troubleshooting

22 Operation
Travis Industries 4011009 93508126
Adjusting the Fan Speed
HEAT OUTPUT
AUTO
OFF
MANUAL
A
A
MANUAL
START
FAULT
W
O
L
H
E
D
M
I
G
H
W
O
L
H
E
D
M
I
G
H
FAN
Use the FAN dial to adjust the
convection blower speed.
Start-Up Sequence
This stove utilizes a start-up sequence whenever the mode switch is changed or the heater is started
when cold. This is to ensure proper operation through all possible settings and operational states (hot
or cold, pellets burning or not burning, etc.). This sequence over-rides all user settings (except the
"OFF" position) to set the auger feed rate to medium, the exhaust blower to high, and the igniter on.
"AUGER ON" Light
This light comes on when the auger is turning. This allows the operator to determine when the auger
is turning.