Avalue Technology ECM-945GSE - Boot Up Options and Keyboard Settings

ECM-945GSE
56 ECM-945GSE User’s Manual
3.5.2.8 Boot Up NumLock Status
Select power on state for NumLock.
Item Description
On Enable NumLock
Off Disable NumLock
3.5.2.9 Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Item Description
Normal A pin in the keyboard controller controls Gate A20
Fast Lets chipset control Gate A20
3.5.2.10 Typematic Rate Setting
This feature enables you to control the keystroke repeat rate when you depress a key
continuously. When enabled, you can manually adjust the settings using the two typematic
controls (Typematic Rate and Typematic Delay). If disabled, the BIOS will use the default
setting.
Item Description
Enabled Enable typematic rate/delay setting
Disabled Disable typematic rate/delay setting
3.5.2.11 Typematic Rate (Chars/Sec)
This is the rate at which the keyboard will repeat the keystroke if you press it continuously.
This setting will only work if Typematic Rate Setting is enabled..
Options: 6, 8, 10, 12, 15, 20, 24, 30
3.5.2.12 Typematic Delay (Msec)
This is the delay, in milliseconds, before the keyboard automatically repeats the keystroke
that you have pressed continuously. This setting will only work if Typematic Rate Setting is
enabled.
Options: 250, 500, 750, 1000