ECM-945GSE
72 ECM-945GSE User’s Manual
3.5.6.3 Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically configure all of the boot
and Plug and Play compatible devices. However, this capability means absolutely nothing
unless you are using a Plug and Play operating system such as Windows®95. If you set
this field to “manual” choose specific resources by going into each of the sub menu that
follows this field (a sub menu is preceded by a “¾”).
The choices: Auto(ESCD), Manual.
3.5.6.4 PCI / VGA Palette Snoop
Leave this field at Disabled.
The choices: Enabled, Disabled.
3.5.6.5 INT Pin 1/2/3/4/5/6/7/8 Assignment
This feature allows you to assign the PCI IRQ numbers for PCI slots. Selecting the default,
Auto, allows the PCI controller to automatically allocate the IRQ numbers.
The choices: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, 15.
3.5.6.6 Maximum Payload Size
This setting defines the maximum payload size.
The choices: 128, 256, 512, 1024, 2048, 4096.
To Next Page
Loading...
