Regenerant Line Connection 13
Rev C
Regenerant Line Connection
The regenerant line from the tank connects to the valve. Make the
connections and hand tighten. Be sure that the regenerant line is secure
and free from air leaks. Even a small leak may cause the regenerant line to
drain out, and the conditioner will not draw regenerant from the tank. This
may also introduce air into the valve causing problems with valve
operation.
Ensure that pipe sealant (Teflon* tape) is applied to the 3/8-inch NPT
regenerant line connection.
Figure 4 Regenerant Line
Connection
*Teflon is a trademark of E.I. duPont de Nemours.
Regenerant Line Connection
To Next Page
Loading...