16 Electrical Connection
Rev C
Electrical Connection
All controllers operate on 12-volt alternating current power supply. This
requires use of the GE Water Technologies supplied AC adapter. A variety
of AC adapters are available for different applications. These AC adapters
are available from your supplier. They include:
120 VAC AC Adapters
Make sure power source matches the rating printed on the AC adapter.
Controller Location
The controllers are designed to be mounted on the valve or attached to a
flat surface. Installations that do not provide easy access to the valve can
have the controller mounted for remote operation.
A remote mount connection, PN 1256257, is available for the AvantaPure
controller.
AC Adapter
Input
Voltage
Application Part Number
Standard wall-mount
AC adapter
120V 60Hz Standard indoor
application
1000811
Outdoor rated AC
adapter
120V 60Hz UL listed for
outdoor
installations
1235448
NOTE: The power source should be constant. Be certain the AC
adapter is not on a switched outlet. Power interruptions longer than 8
hours may cause the controller to lose the time and day settings. When
power is restored, the day and time settings must then be re-entered.
To Next Page
Loading...