What to do if the 'Add Water' indicator light is on in my Avanti Ice Maker?
If the 'Add Water' indicator light is illuminated, it means there is not enough water in the reservoir. To resolve this, press the ON/OFF button to turn off the ice maker, fill the reservoir with water, and then press the power button again to restart the ice-making process.
Why is my Avanti IM1213S-IS not making ice, even when conditions seem right?
Refrigerant leaks or a blockage in the sealed system may be the reason. Contact customer service.
What to do if the 'Ice Full' indicator light is on in my Avanti IM1213S-IS Ice Maker?
If the 'Ice Full' indicator light is on, it means that the ice storage cabinet is full to the top. Simply remove some of the ice to resolve the issue.
What does it mean if both the Ice Full and Add Water lights are on in my Avanti IM1213S-IS?
If both the Ice Full (RED) and Add Water (RED) indicator lights are illuminated, it indicates a possible cooling system issue. Press the ON/OFF button and unplug the unit to allow the system to reset. Wait approximately 10 minutes before reconnecting the unit and restarting the ice-making process. If the problem persists, contact customer service.
What to do if my Avanti IM1213S-IS indicator lights are off?
If all the indicator lights are off, it usually indicates a power issue. Check if the fuse is blown or if there's a blown breaker. Replace the fuse or turn the power back on.
Why is my Avanti IM1213S-IS making large ice pieces that stick together?
If the ice produced is too large and the pieces are sticking together, it suggests that the water temperature in the storage tray or the ambient temperature is too low. Stop the machine, reset the ice-making cycle, and then restart the machine after turning it off.
Why is my Avanti IM1213S-IS compressor making a buzzing noise?
If the compressor is working abnormally and producing a buzzing noise, it's likely that the voltage is lower than recommended. Stop using the ice maker and do not restart it until the voltage returns to normal.
Defines the safety alert symbol used to warn of potential hazards.
Explains the meaning of DANGER, WARNING, and CAUTION safety levels.
Lists critical safety precautions under the DANGER category for user safety.
Lists important safety precautions under the WARNING category for safe operation.
Emphasizes correct grounding and electrical connection procedures for safety.
A table listing common problems, their causes, and suggested solutions.
To Next Page
General
