EasyManua.ls Logo

Avanti IM12CR-IS - User Manual

Avanti IM12CR-IS
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
PORTABLE ICE MAKER
MAQUINA DE HACER HIELO PORTABLE
MACHINE DE GLAÇONS PORTABLE
MODELS
MODELOS
MODELÉS
IM12C IS
IM12CR - IS
Model Number / No. de Modelo:
IM12C-IS / IM12CR-IS
BEFORE
USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications
without notice.
Avanti Products LLC
P.O. Box 520604 - Miami, Florida 33152
www.avantiproducts.com

Questions and Answers

  • C
    Christopher WrightAug 9, 2025
    What to do if indicator lights are off on Avanti IM12CR-IS?
    • L
      Lauren BradleyAug 10, 2025
      If the indicator lights on your Avanti Ice Maker are off, it usually means there's a power issue. Check your fuse, power supply, and breaker. If the fuse is blown, replace it. If the power is off, turn it back on.
  • C
    Charles WrightAug 15, 2025
    Why is the water shortage indicator light on my Avanti IM12CR-IS?
    • N
      Nichole AlvaradoAug 15, 2025
      The water shortage indicator light on your Avanti Ice Maker is on because there isn't enough water in the reservoir. To resolve this, press the ON/OFF button, fill the reservoir with water, wait for about 3 minutes, and then press the power button again to restart the ice maker.
  • T
    Tony RamseyAug 21, 2025
    What to do if the ice full indicator light is on my Avanti IM12CR-IS?
    • S
      Steven JohnsonAug 21, 2025
      The ice full indicator light on your Avanti Ice Maker is on because the ice storage cabinet is full. Simply remove some of the ice to turn the light off.
  • H
    Holly WilsonAug 27, 2025
    Why is the ice from my Avanti IM12CR-IS Ice Maker too large and sticking together?
    • N
      nicole59Aug 27, 2025
      If your Avanti Ice Maker is making ice that's too large and the pieces are sticking together, it could be due to low water temperature in the storage tray or the ambient temperature being too low. Stop the machine, reset the ice-making cycle, turn it off, and then restart it.
  • A
    Angela GomezSep 2, 2025
    Why does my Avanti IM12CR-IS Ice Maker compressor make a buzzing noise?
    • D
      Deanna LopezSep 2, 2025
      If your Avanti Ice Maker's compressor is making a buzzing noise, it is likely due to a voltage issue. The voltage is lower than recommended. Stop the ice maker and do not restart it until the voltage is normal.

Summary

Ice Maker Safety

Important Safeguides

Danger Precautions

Essential safety warnings for immediate danger.

Warning Precautions

Safety warnings for significant risks.

Important Safety Instructions

Before Using Your Ice Maker

Initial setup and preparation steps before operation.

Installation of Your Ice Maker

Guidelines for proper placement and setup.

Electrical Connection

Operating Your Ice Maker

Operating Instructions

Step-by-step guide for starting and running the ice maker.

Care and Maintenance

Troubleshooting Your Ice Maker

Avanti Products Warranty

Avanti IM12CR-IS Specifications

General IconGeneral
TypeCountertop Ice Maker
Ice Production Capacity26 lbs per day
Ice Storage Capacity1.5 lbs
Ice Size OptionsSmall, Medium, Large
Water Reservoir Capacity2.2 Liters
Voltage115V
ColorStainless Steel
Ice ShapeBullet
Control TypeElectronic
RefrigerantR134A
Frequency60 Hz
Power Consumption120W

Related product manuals