To Next PageTo Next PageWhat to do if indicator lights are off on Avanti IM12CBL Ice Maker?
If the indicator lights on your Avanti Ice Maker are off, it usually means there's a power issue. Check your fuse, power supply, and breaker. If the fuse is blown, replace it. If the power is off, turn it back on.
Why is the water shortage indicator light on my Avanti Ice Maker?
The water shortage indicator light on your Avanti Ice Maker is on because there isn't enough water in the reservoir. To resolve this, press the ON/OFF button, fill the reservoir with water, wait for about 3 minutes, and then press the power button again to restart the ice maker.
What to do if the ice full indicator light is on my Avanti Ice Maker?
The ice full indicator light on your Avanti Ice Maker is on because the ice storage cabinet is full. Simply remove some of the ice to turn the light off.
Why is the ice from my Avanti IM12CBL too large and sticking together?
If your Avanti Ice Maker is making ice that's too large and the pieces are sticking together, it could be due to low water temperature in the storage tray or the ambient temperature being too low. Stop the machine, reset the ice-making cycle, turn it off, and then restart it.
Why does my Avanti IM12CBL Ice Maker compressor make a buzzing noise?
If your Avanti Ice Maker's compressor is making a buzzing noise, it is likely due to a voltage issue. The voltage is lower than recommended. Stop the ice maker and do not restart it until the voltage is normal.
General| Ice Storage Capacity | 1.5 lbs |
|---|---|
| Ice Shape | Bullet |
| Power Consumption | 120W |
| Type | Portable Ice Maker |
| Ice Production Capacity | 26 lbs per day |
| Ice Cube Size | Small |
| Voltage | 115V |
