What to do if indicator lights are off on Avanti Ice Maker?
If the indicator lights on your Avanti Ice Maker are off, it usually means there's a power issue. Check your fuse, power supply, and breaker. If the fuse is blown, replace it. If the power is off, turn it back on.
Why is the water shortage indicator light on my Avanti Ice Maker?
The water shortage indicator light on your Avanti Ice Maker is on because there isn't enough water in the reservoir. To resolve this, press the ON/OFF button, fill the reservoir with water, wait for about 3 minutes, and then press the power button again to restart the ice maker.
What to do if the ice full indicator light is on my Avanti IM12C-IS Ice Maker?
The ice full indicator light on your Avanti Ice Maker is on because the ice storage cabinet is full. Simply remove some of the ice to turn the light off.
Why is the ice from my Avanti Ice Maker too large and sticking together?
If your Avanti Ice Maker is making ice that's too large and the pieces are sticking together, it could be due to low water temperature in the storage tray or the ambient temperature being too low. Stop the machine, reset the ice-making cycle, turn it off, and then restart it.
Why does my Avanti IM12C-IS compressor make a buzzing noise?
If your Avanti Ice Maker's compressor is making a buzzing noise, it is likely due to a voltage issue. The voltage is lower than recommended. Stop the ice maker and do not restart it until the voltage is normal.
Prepare the ice maker by removing packing, checking parts, and allowing it to stand before use.
Properly position the ice maker away from heat and sunlight, and connect it to a grounded outlet.
Guidelines and recommendations for using an extension cord with the appliance, emphasizing safety and specifications.
Recommendation to use a surge protector to protect the appliance from power surges and outages.
Explanation of the LED indicators (Power, Add Water, Ice Full) on the control panel.
Step-by-step guide on starting the ice maker, filling the water tank, and collecting ice.
Instructions on how to access and remove ice from the ice basket.
Procedure for cleaning the ice maker's interior and exterior using a water and vinegar solution.
Guidelines for proper placement, ventilation, and clearance around the ice maker.
Advice on how to manage the ice maker during power outages and for long-term disconnection.
Information on contacting Avanti Products Customer Service for product information, parts, and repair.
To Next Page
General
