User Manual
ARIA 3
7
Connecting the Headphones to Your Device
STEP 1
Turn on the headset. It will enter pairing mode automatically on the rst use.
Otherwise, slide and hold the power switch to the “PAIR” position until you
hear “Pairing” and see the LED ashing RED & BLUE.
STEP 2
Turn on your device’s Bluetooth and select “Avantree Aria 3” in the
Bluetooth menu.
STEP 3
Keep the headphones close to your device and wait for 5-10 seconds or until
they connect. Once they’re successfully connected, you’ll hear a “CONNECT-
ED” voice indicator on headphones. The headphones’ LED indicator will ash
blue, then turn solid blue once you play audio.
Using with Your Phone
Hold for 3s
To Next Page
Loading...
