DJB; Reviewed:
SPOC 2/15/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
16 of 28
3600-Indyme.doc
7. Configure the Avaya Voice Priority Processor
This section describes the Avaya Voice Priority Processor (AVPP) configuration.
1. Connect using a serial cable. Connect using a terminal emulator, such as HyperTerminal
with settings of 9600Kb/s, 8 data bits, 1 stop bit and no parity. The following screen is
displayed.
NetLink SVP-II System
Hostname: [slnk_00d07e], Address: 192.1.1.1
System Status
SVP-II Configuration
Network Configuration
Change Password
Exit
Enter=Select X=Exit Use Arrow Keys to Move Cursor
To Next Page
Loading...
