DJB; Reviewed:
SPOC 2/15/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
20 of 28
3600-Indyme.doc
2. Configure the NetLink OAI Gateway’s IP Address, Subnet Mask and Gateway. From the
second screen shown in Step 1, select Network Configuration and press Enter.
Use the down arrow key to get to the IP Address field. Press Enter. Backspace over
the current entry. Enter the NetLink OAI Gateway’s IP Address. Press Enter.
Press the down arrow key to get to the Subnet Mask field. Press Enter. Backspace
over the current entry. Enter the NetLink OAI Gateway’s Subnet Mask.
Press the down arrow key to get to the Default Gateway field. Press Enter. Backspace
over the current entry. Enter the NetLink OAI Gateway’s Default Gateway, which is the
G350 Ethernet IP Address.
Press Esc.
Network Configuration
Hostname: slnk-0642f6, IP Address: 192.168.1.111
Ethernet Address: 00:90:7a:06:42:f6
IP Address 192.168.1.111
Hostname slnk-0642f6
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.100
Gateway TFTP server IP: 255.255.255.255
Allow Telnet Connections: Yes
Allow FTP Connections: Yes
Primary DNS Server: NONE
Secondary DNS Server: NONE
DNS Domain: NONE
Primary WINS Server: NONE
Secondary WINS Server: NONE
Logging: NONE
Log server:
GMT Offset -1
SNMP Console server: NONE
Enter=Edit Esc=Exit
Use Arrow Keys to Move Cursor Up=Wrap around to bottom Down=More
To Next Page
Loading...
