Avaya 4000 Series - Verifying Qos Settings

Avaya Inc. – External Distribution
IP Office & Ethernet Switching Technical Configuration Guide
32
avaya.com
October 2012
7.2.4 Verifying QoS Settings
Use the following commands to verify that the QoS values are being respected.
1
Display the QoS DiffServ settings on a specific port such as port 15:
IPO4526GTX#show lldp med-network-policies port 15
2
Display the QoS DiffServ settings on all ports:
IPO4526GTX#show lldp med-network-policies
3
Display the current QoS DSCP values from IP Office to the IP phones:
IPO4526GTX#show lldp neighbor detail
-------------------------------------------------------------------------------------
LLDP neighbor
-------------------------------------------------------------------------------------
Port: 16 Index: 12 Time: 0 days, 20:50:35
ChassisId: Network address IPv4 192.168.44.17
PortId: MAC address 3c:b1:5b:4a:5f:d4
SysName: AVX4A5FD4
SysCap: TB / TB (Supported/Enabled)
PVID: PPVID Supported: none
VLAN Name List: none PPVID Enabled: none
Dot3-MAC/PHY Auto-neg: supported/enabled OperMAUtype: 1000BaseTFD
PMD auto-neg: 10Base(T, TFD), 100Base(TX, TXFD), 1000Base(TFD)
MED-Capabilities: CNDI / CNDI (Supported/Current)
MED-Device type: Endpoint Class 3
MED-Application Type: Voice VLAN ID: 0 (Priority Tagged)
L2 Priority: 6 DSCP Value: 46 Untagged Vlan, Policy defined
Med-Power Type: PD Device Power Source: FromPSE
Power Priority: High Power Value: 5.6 Watt
HWRev: 9640GD01A FWRev: hb96xxua3_11.bin
SWRev: ha96xxua3_186aS,bin SerialNumber: 11N514602678
ManufName: Avaya ModelName: 9640G
AssetID: