Avaya Inc. – External Distribution
IP Office & Ethernet Switching Technical Configuration Guide
8.2.1.2 Verbose mode results
Running the script in the verbose mode results in the following:
1. Prompt for Voice VLAN ID
Default Voice VLAN ID is set to 42 unless changed
2. Prompt user for Voice VLAN gateway IP address
Default IP address is 192.168.42.254 unless changed
3. Prompt user for Voice VLAN IP subnet mask
Default IP subnet address mask is 255.255.255.0 unless changed
4. Prompt for Data VLAN ID
Default Data VLAN ID is set to 44 unless changed
5. Prompt user for Data VLAN gateway IP address
Default IP address is 192.168.44.254 unless changed
6. Prompt user for Data VLAN IP subnet mask
Default IP subnet address mask is 255.255.255.0 unless changed
7. Set IP Office LAN port (Port 1 on switch)
8. Set Gateway modem/router port (Port 2 on switch)
9. Prompt user for default IP route gateway modem-router
Default IP router is 192.168.44.2 unless changed
10. Prompt user for Call Server IP address
Default Call Server IP address is 192.168.42.1 unless changed
11. Prompt user for File Server IP address
Default File Server IP address is 192.168.42.1 unless changed
12. Create QoS if-group named qosTrustedIfcs with interface class of trusted and assign to all ports
13. Set all port tagging to UntagPvidOnly
Default PVID on port 1 to Voice VLAN ID
Default PVID on all other ports Data VLAN ID
Port 1 is a member of the Voice VLAN, port 2 is a member of Data VLAN, while all other
ports are members of both the Data and Voice VLANs
14. Set LLDP MED Policy on all ports
VLAN ID = Voice VLAN ID, tagging = tagged, DSCP = 46, Priority = 6
To Next Page
Loading...
