* This transceiver has reached end-of-life (EOL). After the inventory depletes, you can no longer
purchase this transceiver. Avaya recommends AA1419048–E6 as a replacement.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-SX
SFP transceivers.
Table 4: IEEE 802.3z 1000BASE-SX (LC) SFP specifications
Parameter Specifications
Connectors Duplex LC
Cabling • 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Distance • up to 275 m using 62.5 µm MMF optic cable
• up to 550 m using 50 µm MMF optic cable
Wavelength 850 nanometers (nm)
Link optical power budget 7.0 deciBels (dB)
Transmitter characteristics
Launch power –10 to –4.0 dBm
Receiver characteristics
Receiver sensitivity –17 dBm
Maximum input power 0 dBm
1000BASE-SX (MT-RJ) SFP specifications
The 1000BASE-SX (MT-RJ) type SFP provides gigabit Ethernet connectivity using MT-RJ
multimode fiber connectors. The part number is AA1419014-E5*.
* This transceiver has reached end-of-life (EOL). After the inventory depletes, you can no longer
purchase this transceiver. Avaya recommends AA1419048–E6 as a replacement. You must use a
jumper cable to adapt the LC connector to the MT–RJ connector.
The following table describes standards, connectors, cabling, and distance for the 1000BASE-SX
(MT-RJ) type SFP transceiver.
Table 5: IEEE 802.3z 1000BASE-SX (MT-RJ) SFP specifications
Parameter Specifications
Connectors Duplex MT-RJ
Cabling • 62.5 µm MMF optic cable
• 50 µm MMF optic cable
Distance • up to 275 m using 62.5 µm MMF optic cable
• up to 550 m using 50 µm MMF optic cable
Wavelength 850 nm
Table continues…
SFP
26 Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
