Parameter Specification
Maximum dispersion power penalty 2 dB at 40 km
Minimum attenuation between transmit and receive
ports
3 dB
Transmitter characteristics
Launch power –2.0 to 3.0 dBm
Receiver characteristics
Receiver sensitivity –24 dBm
Maximum receiver power 0 dBm
1000BASE-ZX CWDM (LC) SFP specifications
The 1000BASE-ZX SFP transceiver provides CWDM gigabit Ethernet connectivity using single
mode fiber. This SFP supports only full-duplex operation. The part numbers of the 70 km models
range from AA1419033-E5 to AA1419040-E5.
Important:
For the 70 km CWDM SFP transceivers, a minimum attenuation of 10 dB must be present
between the transmitter and receiver.
Table 11: 1000BASE-ZX CWDM (70 km) SFP specifications
Parameter Specifications
Connectors Duplex LC
Cabling SMF, 9 µm
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Operating temperature range 0 to 60°C
Link optical power budget 20 dB
Transmitter characteristics
Launch power –3.0 to 2.0 dBm
Receiver characteristics
Receiver sensitivity –23 dBm
Maximum input power –3.0 dBm
1000BASE-ZX DDI 1550 nm SFP specifications
The following table describes the 1000BASE-ZX CWDM SFP transceiver. This SFP transceiver
operates at 1550 nm and has a reach of up to 70 km. The part number is AA1419052-E6.
This transceiver has been discontinued and is no longer available for purchase. Avaya recommends
AA1419065-E6 as a replacement.
SFP
30 Installing Transceivers and Optical Components on Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
