EasyManua.ls Logo

Avaya S8300 - Page 4

Avaya S8300
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING:
!
Failure to install both grounds will void the Product Safety certifications (UL and the CE Mark)
on the product and create a hazard that could result in death or severe personal injury.
LASER Product
The equipment described in the documentation for this product may contain Class 1 LASER Device(s). The
LASER devices operate within the following parameters:
• Power output –9.5 dBm to -4 dBm
• Wavelength 1285 nm to 1343 nm
CLASS 1 LASER PRODUCT EN 60825-1:1994 + A11, EN60825-2:194, EN60950:1992 + A1 + A2 + A3.
Laser components used in the G700 are Class 1 Laser Products that comply with 21CFR 1040.10 and CFR
1040.11. Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure. Contact your Avaya representative for more laser product information.
Luokan 1 Laserlatte
Klass 1 Laser Apparat
Rack-Mounting
WARNING:
!
Warning: if the rack is not securely fixed in place, do not proceed with the installation.
WARNING:
!
Balancing the G700 Media Gateway requires two people. Use caution to avoid injury.
WARNING:
!
If the G700 Media Gateway is being mounted in a rack with other equipment already installed,
the G700 Media Gateway must be positioned to avoid imbalance.
Technical Specifications
WARNING:
!
Installation in a Restricted Access Location is required in Finland and Norway.
Table 1. Technical Specifications
Chassis Dimensions
Height 2U (3.5 in) 88 mm Depth 17.7 in 450 mm
Width 19 in 482.6 mm Weight empty 22.25 lbs 10 kg
Weight (with
media modules)
27-34 lbs 12-16 kg
Required Clearances
Front 12 in 30 cm consistent with EIA 464 data rack standards
Rear 18 in 45 cm
Temperature Tolerances
Recommended 65 to 85 deg Farenheit 18 to 29 deg Celsius

Other manuals for Avaya S8300

Related product manuals