EasyManua.ls Logo

Avaya S8300 Series User Manual

Avaya S8300 Series
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Job Aids for Field Replacements
(FRUs) for the Avaya S8300 Server
with the G700 Media Gateway
03-300528
Issue 6
May 2009

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Avaya S8300 Series and is the answer not in the manual?

Avaya S8300 Series Specifications

General IconGeneral
ProcessorIntel Xeon
Network InterfacesDual Gigabit Ethernet
Form Factor1U rack-mountable
Hard DriveSAS
Power SupplyRedundant Power Supplies

Summary

Job Aid: Replacing the S8300 Server or its hard drive

Before you go to the site

Steps to prepare before visiting the customer site for server replacement.

Identify the replacement scenario

Determining the correct procedure based on current and target hardware/software.

At the customer site

Procedures to be performed once at the customer's location.

Back up data

Essential steps to back up critical server configuration and data.

Restore Data

Procedure for restoring backed-up data onto the replacement server.

Final replacement tasks

Completing the replacement process and final checks.

Job Aid: Replacing the G700 Media Gateway

Before you go to the site

Preparation steps for replacing the G700 Media Gateway.

At the customer site

On-site procedures for replacing the G700 Media Gateway.

Appendix 1: Set up a TFTP Server

Instructions for configuring a TFTP server for file transfer and firmware installation.

Job Aid: Replacing Media, Expansion, or Octaplane Modules

Replacing Media Modules

Procedure for replacing various media modules in the G700.

Replacing Avaya Expansion Modules

Procedure for replacing Avaya Expansion Modules in the G700.

Replacing an Avaya Octaplane Stacking Module

Procedure for inserting or replacing an Octaplane Stacking Sub-Module.

Job Aid: Supported CD/DVD-ROM drives

Panasonic Digistor

Details and usage of the Panasonic Digistor CD/DVD-ROM drive.

Connecting to the server

Steps for connecting the CD/DVD-ROM drive to the S8300 Server.

Related product manuals