Restore Data
03-300528 Issue 6 May 2009 33
- User Name
- Password
- Host Name (enter the host IP address)
- Directory
5. Click View.
The system displays the View/Restore Data Results screen.
6. If you need to restore the OS data set (server and system files), restore the OS data set
first. If not, restore the security data set now.
7. Select both "Force..." options then click Restore.
8. To monitor the restore progress at the Server (Maintenance) Web page select Data
Backup/Restore > Restore History.
The system displays the Restore History screen.
9. Select the backup file that you want to monitor and click Check Status.
The system displays the Restore History Results screen.
10. Click Refresh periodically until the message indicates that the restore was successful. This
takes approximately five (5) minutes.
11. Repeat Steps 1-10 above to restore:
a. Security data set (if not performed in Step 6
above)
b. Communication Manager translations (main server/primary controller only, not a LSP)
data
c. Messaging application data in the "audix-tr-name-msg" file (primary controller only, not a
LSP)
d. Messaging application announcements in the "audix-ann" file (primary controller only, not
a LSP)
e. SES database
Reboot the server after you complete the restore procedure.
To Next Page
Loading...
