Avaya S8300 Series - Job Aid: Replacing the USB Modem; Removing the Old Modem; Replacing the Modem

03-300528 Issue 6 May 2009 61
Job Aid: Replacing the USB modem
!
Important:
Important: Always check the Avaya Support Web site for Product Support Notices at http://
support.avaya.com and select Communication Manager > Product Support
Notices.
!
Important:
Important: This Job Aid is to replace the US Robotics Modem 5637-OEM (Material ID
700464506) or the MultiTech MT9234ZBA-USB (Material ID 700451172) that are
used with Avaya S8300B, S8300C or S8300D Servers.
Removing the old modem
To remove the old or defective modem:
1. Remove the USB cable and phone line(s) from the rear of the modem:
Replacing the modem
To replace the USB modem (Material ID 700464506 or 700451172):
1. Reconnect the USB cable and the phone line(s) to their respective connectors on the rear of
the modem.