Avaya S8730 - User Manual

Other manuals for Avaya S8730

Questions and Answers

V
Valerie FoxSep 10, 2025
What to do if I cannot access Avaya Installation Wizard?
- P
  Penny ColeSep 10, 2025
  If you cannot access the Avaya Installation Wizard, ensure that you are plugged into the Services port (2 [Eth1]). Also, make sure you are using the correct IP address, login, and password. Finally, ensure the NIC on the laptop is configured correctly.
K
Kimberly HughesAug 25, 2025
What to do if I cannot log in to the Avaya S8730?
- M
  Mallory GarciaAug 25, 2025
  If you're unable to log in to the Avaya Server, start by checking the link LED on the server. If it's off, there may be a cable or hardware issue. Also, ensure you are using SSH instead of telnet, and that you're connected to the Services Ethernet port. Verify that you're using a cross-over cable between the Services laptop computer and the server. Clear the ARP cache on the Services laptop computer and ensure you have connectivity. Finally, verify that the NIC on the Services laptop computer is correctly configured.
C
Cindy MitchellAug 25, 2025
How to access Avaya Installation Wizard on Avaya S8730 Server?
- Y
  yweberAug 26, 2025
  If you're having trouble accessing the Avaya Installation Wizard, first ensure that you are plugged into the Services port. Confirm that you are using SSH, not telnet, and that you're using the correct IP address (192.11.13.6). Double-check that you have the correct login and password. Lastly, ensure that the NIC on your laptop is configured correctly.
T
Tammy PadillaSep 23, 2025
Why can't I get files from the Avaya S8730 Server RFA site?
- M
  Mary SmithSep 23, 2025
  If you cannot get files from the RFA site, provide the correct SAP number and the serial number for the reference IPSI.
P
Paul MendozaSep 12, 2025
Why is there no power to the Avaya S8730 media server?
- H
  hknightSep 12, 2025
  If there is no power to the Avaya media server, make sure the media server is plugged into the UPS and that the UPS has power. For S8700 servers, open the door on the front of the media server and push the power button. For S8710 servers, push the power button on the front of the media server.
S
Sheri KnightSep 15, 2025
What to do if I cannot log into the Avaya Server Ethernet switch?
- R
  richardsongarrettSep 15, 2025
  If you cannot log into the Ethernet switch, ensure that you are connected to the correct Ethernet port (for one Ethernet switch, it is the port marked Console). Also, make sure you have the correct login ID and password. See the user’s guide that comes with the Ethernet switch. Finally, ensure the network card on the laptop is configured correctly.
T
Timothy JonesSep 4, 2025
Why is the Avaya S8730 Server in no-license mode?
- J
  Joseph WilsonSep 4, 2025
  The Avaya Server might be in no-license mode if the license file does not have an IP address yet, or if, after 30 minutes, the license file has not located the reference IPSI.
D
Desiree LoganSep 5, 2025
Why no “V” shows on the IPSI LED on Avaya S8730 Server?
- H
  Hannah FergusonSep 5, 2025
  If no 'V' shows on the IPSI LED, it could mean that the IPSI is not connected to the Ethernet switch or the network. Ensure that the port on the Ethernet switch assigned to that IPSI is enabled.
T
Tracey FloresSep 23, 2025
Why does the Avaya Server ASG not work?
- D
  dellisonSep 23, 2025
  If the ASG does not work, try re-installing the Avaya authentication files.
K
Keith CunninghamAug 30, 2025
What to do if Avaya Server is not shadowing?
- A
  arthurbeasleyAug 30, 2025
  If the servers are not shadowing, make sure you are using a cross-over cable. Also, verify that the fiber optic cable is plugged in correctly, RX to TX and TX to RX.