Why the IPSI LEDs flash on Avaya S8730?
If the IPSI LEDs are flashing, ensure that the IPSI is in the correct slot. Additionally, try pinging the IPSI from the server and pinging the server from the IPSI.
How to fix 'Cannot ping out to the customer network' on Avaya S8730?
To enable pinging out to the customer network from the Avaya Server, ensure that in the LAN security settings 'output from server' for ICMP is enabled.
What to do if Avaya Server is not shadowing?
If the servers are not shadowing, make sure you are using a cross-over cable. Also, verify that the fiber optic cable is plugged in correctly, RX to TX and TX to RX.
What to check if there is no power to the Ethernet switch on Avaya Server?
If the Ethernet switch has no power, ensure that it is plugged into the UPS or the outlet and that the UPS or outlet has power.
How to troubleshoot 'No power to the UPS' on Avaya S8730 Server?
If the UPS has no power, ensure that the UPS is plugged into the outlet and that the outlet has power.
How to enable ping to Avaya Server from customer network?
To allow pinging the Avaya Server from the customer network, ensure that in the LAN security settings, 'input to server' for ICMP is enabled.
What to do if I cannot log in to the UPS subagent on Avaya Server?
If you're having trouble logging in to the UPS subagent, first ensure that the SNMP subagent is installed in the UPS. Next, make sure you're connected to the correct Ethernet port. Verify that you have the correct login ID and password. Finally, ensure that the network card on the laptop computer is configured correctly.
Why I cannot log in to the Ethernet switch on Avaya S8730?
If you're unable to log in to the Ethernet switch, verify that you are connected to the correct Ethernet port. Also, ensure that you have the correct login ID and password. Finally, confirm that the network card on the Services laptop computer is configured correctly.
What to do if there is no power to Avaya S8730?
If your Avaya Server has no power, first ensure that the server is plugged into the UPS. Next, verify that the UPS has power. If both are okay, push the power button on the front of the server.
How to access Avaya Installation Wizard on Avaya S8730 Server?
If you're having trouble accessing the Avaya Installation Wizard, first ensure that you are plugged into the Services port. Confirm that you are using SSH, not telnet, and that you're using the correct IP address (192.11.13.6). Double-check that you have the correct login and password. Lastly, ensure that the NIC on your laptop is configured correctly.
To Next Page
General
