KT; Reviewed:
NAB 6/18/03
Solution & Interoperability Test Lab Application Notes
©2003 Avaya Inc. All Rights Reserved.
5 of 10
AscomS8700.doc
2.
Set Restrict Last Appearance to “n”. Go to the next page.
3.
Configure four call appearances as shown below.
4.
Save the changes for this station.
5.
If needed, use the duplicate station command to copy these settings for additional
stations.
6.
Plug in the Ascom Radio Exchange Unit’s RJ-45 connectors to the ports associated with
the provisioned stations.
add station 25200 Page 2 of 4
STATION
FEATURE OPTIONS
LWC Reception: spe Auto Select Any Idle Appearance? n
LWC Activation? y Coverage Msg Retrieval? y
LWC Log External Calls? n Auto Answer:
none
CDR Privacy? n Data Restriction? n
Redirect Notification? y Idle Appearance Preference? n
Per Button Ring Control? n
Bridged Call Alerting? n Restrict Last Appearance? n
Active Station Ringing: single
H.320 Conversion? n Per Station CPN - Send Calling Number?
Service Link Mode: as-needed
Multimedia Mode: basic
Display Client Redirection? n
AUDIX Name: Select Last Used Appearance? n
Coverage After Forwarding? s
Direct IP-IP Audio Connections? y
Emergency Location Ext: 25200 IP Audio Hairpinning? y
add station 25200 Page 3 of 4
STATION
SITE DATA
Room: Headset? n
Jack: Speaker? n
Cable: Mounting: d
Floor: Cord Length: 0
Building: Set Color:
ABBREVIATED DIALING
List1: List2: List3:
BUTTON ASSIGNMENTS
1: call-appr 6:
2: call-appr 7:
3: call-appr 8:
4: call-appr 9:
5: 10:
To Next Page
Loading...
