THE PRESETS MENU
When you have the display looking the way you want it, you can
save the settings to a preset location in memory. If you need to
change the settings to monitor a different signal, you can change
them back by recalling the preset. The settings saved by this function
are:
• Center Frequency
• Span
•LO Offset
• LNB (if present)
• RF Input
•RBW
• Reference Level
Option Description
Save Preset Press the
<SELECT> button to save the current settings as
Preset 1. If you do not want to erase the settings in Preset 1,
press the
<UP> or <DOWN> buttons until you find a preset that
is acceptable.
Set Max
Presets
Use the <UP> and <DOWN> buttons to change the maximum
number of presets. If you set this parameter to match the
number of presets that you use, you never have to scroll past
any unused presets.
Delete Single Use this option to delete the settings stored in a preset
location.
Delete All Use this option to delete the settings stored in all preset
locations.
To Next Page
Loading...
