Need help?Do you have a question about the AVer EH1000H-4 Nano and is the answer not in the manual?
General| Video Input | 4 Channels |
|---|---|
| Maximum HDD Capacity | Up to 6TB |
| Network Interface | 1 RJ45 10/100 Mbps |
| USB Ports | 2 USB 2.0 |
| Power Supply | DC 12V/2A |
| Video Output | HDMI, VGA |
| Hard Drive Support | 1 SATA |
| Audio Output | 1 RCA |
| Video Compression | H.264 |
| Remote Viewing | Yes |
| Operating Temperature | 55°C |
Details the contents of the EH1004H-4 Nano and EH1004H-4 Nano+ units.
Describes the components and indicators located on the front of the DVR unit.
Details the various ports and connections available on the back of the DVR unit.
Guides users through the initial setup process for the DVR system.
Details the pin definitions for connecting sensors, relays, and PTZ cameras via RS485.
Explains the functions of each button on the DVR's remote control.
Guides new users through the initial setup and configuration of the DVR software.
Describes the interface and functions available in the DVR's live preview mode.
Describes the interface and functions for reviewing recorded video footage.
Covers general system settings, including storage, language, and time configuration.
Details how to configure both IP and analog cameras connected to the DVR.
Configures recording schedules, modes, and motion detection for cameras.
Configures network settings for remote access and connectivity.
Allows scheduling of various DVR functions like recording, network access, and alarms.
Guides on backing up recorded video data from the DVR system.
Configures input from external sensor devices for alarm triggers.
Configures output signals for external devices triggered by DVR events.
Sets up various alarm conditions and their corresponding actions.
Manages user accounts, permissions, and access levels for the DVR system.
Lists the necessary hardware and software specifications for using the USB Playback Console.
Provides instructions for installing the USB Playback Console software on a PC.
Explains the user interface and controls of the USB Playback Console software.
Details the process of backing up recorded files from the DVR's hard disk.
Guides on performing visual searches within recorded video footage.
Explains how to search for specific events recorded by the DVR.
Explains how to use the iStable function to reduce video jitter and stabilize footage.
Describes the interface and controls of the PCViewer application for remote access.
Describes the interface and controls of the Remote Console application.
Guides on accessing and playing back recorded video remotely.
Guides on accessing the DVR server using a PDA with the PDAViewer application.
Explains how to access the DVR server using a mobile phone with the JavaViewer.
Introduces the Remote iSetup tool for configuring DVR servers remotely.
Explains the Remote iBackup tool for backing up DVR data.
Steps for logging into the domain name registration service.
Details the user information required for domain name registration.
To Next Page
