9
To access the web interface:
1. Download and install AVer Device Utility to your computer from AVer Download Center
(https://www.aver.com/download-center
) and launch the software.
2. Click Search to see available devices on the same local area network (LAN).
Note:
• Make sure your speakerphone has internet.
•
AVer Device Utility and speakerphone must be on the same LAN.
3. Double-click on your speakerphone’s IP address in the IPv4 Address column to open the web
interface in your browser.
To change your network to DHCP or static IP:
1. Select the checkbox of your speakerphone.
2. Enter the changed password in the Login field.
3. Select DHCP or Static IP, then enter your network settings if applicable in the Settings section.
4. Click Apply.
To Next Page
Loading...
