AVer VB130 - Remote Control

English-4
Remote Control
SmartFrame Audio AI Control
End Call
Load Preset Hotkey
Volumn +/-
Brigthness +
Mute
Bluetooth
Camera Directional
Control
Call/Answer
Zoom In/Out
Preset Position/
Number Buttons
Brightness -
Compound Key
OSD Menu*
Enter

SmartFrame ( ):
One-click automatic FOV adjustment to fit all participants in screen for one
time. Press and hold the button for 1~2 sec to switch from manual to auto framing mode or Off.

Audio AI Control ( ):
Press and hold the button for 1~2 sec to switch modes among Audio
tracking, Audio frame, Audio Preset Tracking, Presentation mode, Audio fence and Off.
[Note]
Audio AI function supports up to 4~5 meters away from camera.

Bluetooth ( ):
Hold it for 1~2 sec to enable Bluetooth pairing with mobile phone. Short press it
again to disconnect Bluetooth.
[Note]
Wireless dongle is an optional item. Please contact your local dealer for purchasing.

Enter ( ):
Press it to show the current AI function on screen such as Auto Framing.

Load Preset Hotkey ( ):
Press it to move to preset position as user has set in sequence.

Number 0~9:
Long press the number button to set preset point. One-click the number key to load
preset point.

FOV:
Press
then to change field of view.

WDR:
Press
then to enable/disable the WDR function.

Presentation mode:
Press
then to setup presentation area while under presentation
mode.
[Note] AAA batteries required
*Not supported for VB130