English
4.7 Using proportional tares
FX 50 User Instructions 18
Fig 4-7. Weighing using unknown tares (continued)
4.7 Using proportional tares
N NOTE: This function is for the USA and Canada variants only.
You can enter the tare weight of items such as a containers as a percentage
proportion of the total gross weight of the item and the tare. For example, you
can enter a proportional tare of 25% if the gross weight of the items you want
to weigh includes a tare weight that is 25% of the gross weight to package the
item.
N NOTE: At step 6 you can manually enter the unit price of the item or
you can recall the item price using either a direct PLU or an indirect
PLU. Refer to Sections 4.9 - 4.12 for information about PLUs.
To Next Page