Avery Berkel XT series - 6.8 Using the FIX key

6.8 Using the FIX key 56
XM and XT Operator Instructions
6
6.8 Using the FIX key
Use the FIX function:
Note: If your scale is
configured only to retain
the tare, the PLU will not
be retained.
O To retain a tare until it is cancelled
O To retain a PLU until it is cancelled
O For pre-pack operations at the scale if the scale has been
configured to allow this.
6.8.1 Weighed goods
1. Touch .
2. Place the container on the scale and touch
(if you want to
retain the tare).
3. Fill the container either on the scale or away from the scale.
4. Select the PLU.
5. Touch
to print the label.
6. Remove the goods from the scale.
7. Touch
to cancel the tare.
8. Touch
to cancel the PLU.
6.8.2 Nonweighed items
1. Select the PLU.
2. Touch
.
3. If there is more than one item, use the fixed numeric keys to
e
nter the number of items in the Items field
.
4. Touch
.
5. Repeat steps 3 and 4 until you have printed all the labels you
n
eed.
6. Touch
and cancel the PLU when you have finished.