11/07 Rev. 4.03-01 USER-/SERVICE MANUAL Technical Data
AP7.t
2
Device Types, Application
AP7.t
• Intended purpose: Monotone printing of textile labelling materials for thermal
and thermotransfer processes
• Processing roll material
• Resolution: the AP7.t is optionally available with 203 or 300dpi resolution
• Print speed up to 200mm/sec (8”/s) with the AP 7.t (203dpi) or
up to 150mm/s (6“/s) with the AP 7.t (300dpi).
• Print width up to 104mm with the AP 7.t (203dpi) or
105mm with the AP7.t (300dpi).
• Interfaces: RS-232, USBCentronics, Ethernet
Options
Internal Options …should be factory-fitted or installed by a service engineer:
• Reflex Sensor Kit: Light barrier fitting that apart from the transmission sensor,
also contains a reflex sensor.
• I/O board: RS-422/485 interface, signal interface
External
Options
…do not require any special alterations to the printer:
• Cutter
• TCS (Textile Cutter-Stacker)
• (External) rewinder for material rolls with 38mm (1.5”), 75mm (3”) or 100mm
(4”) cores
• Keyboard for standalone operation
To Next Page
Loading...
