Avid Technology NEXIS E4 User Manual

Installing and Setting Up the System
43
b. Click Properties.
c. On the Network tab, select Internet Protocol Version 4 (TCP/IPv4), then click Properties.
d. Click
Use the following IP address: and enter 169.254.10.20, with a subnet mask of
255.255.255.0, then click OK.
n
By default, the Controller IP address on every Avid NEXIS system is set to 169.254.10.10. You must
set the IP address of the computer to 169.254.10.xx, where xx can be anything except
10. For this
example, we chose 169.254.10.20.

Avid Technology NEXIS E4 Specifications

General

Brand	Avid Technology
Model	NEXIS E4
Category	Server
Language	English