Need help?Do you have a question about the Avid Technology NEXIS and is the answer not in the manual?
Describes the different hardware models available for the Avid NEXIS system.
Details various ways the Avid NEXIS hardware can be configured into shared storage systems.
Provides an overview of the physical components and architectural elements of the Avid NEXIS system.
Details the different controller models, their supported slots, technical specifications, and dual controller support.
Provides essential guidelines and requirements for installing Avid NEXIS hardware into a rack enclosure.
Explains how to physically connect Avid NEXIS hardware to network switches.
Details the process for enabling link aggregation (NIC teaming) for improved network performance and redundancy.
Lists the required and optional information needed for initial Avid NEXIS software installation and system setup.
Outlines the overall process for installing and setting up an Avid NEXIS Engine or SDA.
Details how to configure a computer's IP address to communicate with the Avid NEXIS hardware.
Walks through the software installation and system configuration wizard for Avid NEXIS.
Provides information on how to upgrade the Avid NEXIS software on engines and the system.
Discusses the impact of drive failures on Workspaces and system operation, including system drive issues.
Covers procedures for replacing system or Media Pack drives, including precautions and drive size compatibility.
Explains how to add Media Packs to an existing Avid NEXIS system to increase storage capacity.
Provides step-by-step instructions for removing and inserting power supplies in 2U and 4U chassis.
Explains how to install a redundant controller for increased system availability and failover support.
Details the process for moving components to a new chassis if the original chassis is faulty.
Guides on how to add new Avid NEXIS Engines to expand storage capacity and system flexibility.
Details electrical specifications including power supply types, voltage, frequency, and power consumption.
Lists the operating and non-operating environmental specifications for temperature, humidity, and altitude.
Highlights general safety warnings and cautions related to operating and servicing Avid NEXIS hardware.
Explains FCC regulations regarding RF emissions and device classification (Class A and B).
Describes the different hardware models available for the Avid NEXIS system.
Details various ways the Avid NEXIS hardware can be configured into shared storage systems.
Provides an overview of the physical components and architectural elements of the Avid NEXIS system.
Details the different controller models, their supported slots, technical specifications, and dual controller support.
Provides essential guidelines and requirements for installing Avid NEXIS hardware into a rack enclosure.
Explains how to physically connect Avid NEXIS hardware to network switches.
Details the process for enabling link aggregation (NIC teaming) for improved network performance and redundancy.
Lists the required and optional information needed for initial Avid NEXIS software installation and system setup.
Outlines the overall process for installing and setting up an Avid NEXIS Engine or SDA.
Details how to configure a computer's IP address to communicate with the Avid NEXIS hardware.
Walks through the software installation and system configuration wizard for Avid NEXIS.
Provides information on how to upgrade the Avid NEXIS software on engines and the system.
Discusses the impact of drive failures on Workspaces and system operation, including system drive issues.
Covers procedures for replacing system or Media Pack drives, including precautions and drive size compatibility.
Explains how to add Media Packs to an existing Avid NEXIS system to increase storage capacity.
Provides step-by-step instructions for removing and inserting power supplies in 2U and 4U chassis.
Explains how to install a redundant controller for increased system availability and failover support.
Details the process for moving components to a new chassis if the original chassis is faulty.
Guides on how to add new Avid NEXIS Engines to expand storage capacity and system flexibility.
Details electrical specifications including power supply types, voltage, frequency, and power consumption.
Lists the operating and non-operating environmental specifications for temperature, humidity, and altitude.
Highlights general safety warnings and cautions related to operating and servicing Avid NEXIS hardware.
Explains FCC regulations regarding RF emissions and device classification (Class A and B).
General| Category | Server |
|---|---|
| Redundancy | Yes |
| RAID Support | Yes |
| Management Interface | Web-based |
| Operating System | Proprietary |
| Supported Protocols | NFS, SMB |
| Form Factor | Rackmount |
| Power Supply | Redundant |
To Next Page
