2
Rear View
Feature Description
Ethernet Port Accepts an Ethernet connection to a network. Server
communication and image data transmission occurs over this
connection. The camera also receives power when it is
connected to a network that provides Power over Ethernet.
Power Connector Block Accepts a terminal block with either AC or DC power
connected. DC input can be either polarity. Only required when
Power over Ethernet is not available.
Audio/Video Connector Accepts a mini-jack connector (3.5 mm). For more information,
see Connecting to Microphones and Video Monitors in the
Cable Connections section.
I/O Terminals Accepts connections to external input/output devices. For more
information, see Connecting to Input/Output Devices in the
Cable Connections section.
Connection Status
LED
Provides information about the camera’s operation. For more
information, see the LED Indicators section.
Link LED Indicates if there is an active connection on the Ethernet port.
To Next Page
Loading...
