1. In the RTSP Stream URI area, choose one of the options from the Protocol drop down list then click
Apply.
l Unicast — select this option if you only plan to view the video stream from one video player at a
time.
l Multicast — select this option if you plan to view the video from more than one video player
simultaneously.
2. To watch the camera’s live video stream from an external video player, click Generate RTSP Stream URI.
The generated address is displayed at the bottom of the RTSP Stream URI area.
If the Generate RTSP Stream URI button is not available, the RTSP stream URI is auto-generated.
a. Copy and paste the generated address into your video player. DO NOT open the live video
stream yet.
b. Add your username and password to the beginning of the address in this format:
rtsp://<username>:<password>@<generated RTSP Stream URI>/
For example: rtsp://admin:admin@192.168.1.79/defaultPrimary?streamType=u
c. Open the live video stream.
Accessing the Still Image URI
In the Compression and Image Rate page, you can access the last still image frame that the camera recorded.
l To access the still image, click the URI link in the Still Image URI Area area.
The last recorded frame of video from the camera’s primary stream is displayed. You can choose to save or print
the image directly from the browser.
Motion Detection
On the Motion Detection page, you can define the green motion detection areas in the camera’s field of view.
Motion detection is ignored in areas not highlighted in green.
To help you define motion sensitivity and threshold, motion is highlighted in red in the image panel.
NOTE: This motion detection setting configures pixel change detected in the camera's field of view. If you are
configuring an Avigilon video analytics camera, you will need to configure the detailed analytics motion
detection and other video analytics features through the Avigilon Control Center Client software. For more
information, see the Avigilon Control Center Client User Guide.
Accessing the Still Image URI 13
To Next Page
Loading...
