Avision DF-0510 - 8 Troubleshooting; Frequently Asked Questions

8-1
8. Troubleshooting
If you have problems with the operation of your scanner,
please check the following troubleshooting hints.
8.1 Frequently asked Questions
Question: Paper becomes jammed during scanning.
Answer: 1) Open the ADF unit.
2) Pull out the jammed paper carefully.
3) Close the ADF unit.
Question: More than one sheet of paper were fed into
the scanner.
Answer: 1) Open ADF unit.
2) Remove the multi-fed sheets of paper.
3) Close the ADF unit.
4) Flatten the corners and edges; loosen the
Paper before reloading it in the paper
guide.
5) Check the feeding roller condition and do
the cleaning if necessary.
Question: Paper becomes skewed in the scanner.
Answer: 1) Check the feeding roller condition; do the
cleaning if necessary.
2) Use the paper guide when feeding the
paper.