Avital MAXX2 - Programming Table for Remote Controls

®2002 Directed Electronics, Inc.
27
Factory No. of
Feature Setting Chirps Secondary Action
Arm/Disarm/Panic Button 20 Press any remote button(s). The
Two Stage Unlock Channel 1 siren will chirp once for confirmation.
Accessory(-) Output Button 21 Press any remote button(s). The
for Boot Release Channel 2 siren will chirp twice for confirmation.
(disarmed only)
Silent Arm / Disarm Button 22 Press any remote button(s). The siren
Channel 3 will chirp three times for confirmation.
Accessory(-) Button 23 Press any remote button(s). The siren
Output Timed Channel 4 will chirp four times for confirmation.
Accessory(-) Output Button 24 Press any remote button(s). The siren
Pulsed / Latched + Channel 5 will chirp five times for confirmation.
Remote Sensor Button 25 Press any remote button(s). The siren
Bypass + Channel 6 will chirp 6 times for confirmation.
All Channel Learn — 26 Press button. The siren will
chirp once to confirm factory preset
order.
Instant Code Deletion — 27 Wait 3 seconds. The siren will chirp
twice. All remotes are erased from
memory.
NOTE: When assigning channels to different buttons than the factory
settings, you must “All Channel Learn” a transmitter and then change the
individual assignments with feature number 20 to 25 as required.
Programming Table for Remote Controls