Module-Balancer VAS 6910
incl. Powercord USA /GB
incl. Unpacking, startup and
brief instructions manual
(hard copy)
Use the included mains cord set (power cord)!
If the mains cord set has to be changed note the following requirements strictly!
On 240 V mains grid the mains cord set must be designed for a continuous current of 10 A,
on 120V mains grid the mains cord set must be designed for a continuous current of 20 A.
The mains cord set must have a C19 plug for the connection to the VAS6910 suitable for
the above current ratings.
Connect VAS 6910 only to protective contact sockets!
Set up the VAS 6910 in a way that there is always free access to the power separator!
(Power cord from the mains socket).