VAS 6910 Unpacking Instructions, Start-up, Brief instructions V9.00 10/17 All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions.
2. Care must be taken as burns can occur from touching hot parts.
3. Do not operate equipment with a damaged cord or if the equipment has
been dropped or damaged - until it has been examined by a qualified
serviceman.
4. Do not let cord hang over edge of table, bench or counter or come in
contact with hot manifolds or moving fan blades.
5. If an extension cord is necessary, a cord with a current rating equal to or
more than that of the equipment should be used. Cords rated for less
current than the equipment may overheat. Care should be taken to
arrange the cord so that it will not be tripped over or pulled.
6. Always unplug equipment from electrical outlet when not in use. Never
use the cord to pull the plug from the outlet. Grasp plug and pull to
disconnect.
7. Let equipment cool completely before putting away. Loop cord loosely
around equipment when storing.
8. To reduce the risk of fire, do not operate equipment in the vicinity of open
containers of flammable liquids (gasoline).
9. Adequate ventilation should be provided when working on operating
internal combustion engines.
10. Keep hair, loose clothing, fingers, and all parts of body away from
moving parts.
11. To reduce the risk of electric shock, do not use on wet surfaces or
expose to rain.
12. Use only as described in the manual. Use only manufacturer´s
recommended attachments.
13. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have
impact resistant lenses, they are NOT safety glasses.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General
