Camera Quick Access Control
Press the AUTO EXPOSURE button to turn on automatic
exposure. In non-auto exposure mode, turn the IRIS knob to
manually adjust the camera aperture value.and the status is
displayed at the bottom right of the screen.
Press the AUTO WB button to turn on automatic white balance.
Press the ONE PUSH WB button, the camera enters the
one-touch white balance mode.
In non-automatic white balance mode, turn the R knob to
manually adjust the camera red gain and turn the B knob to
manually adjust the camera blue gain.and the status is
displayed at the bottom right of the screen.
Press the AUTO AF button to turn on the camera autofocus, and
press the ONE PUSH AF button to put the camera into
one-touch focus mode.
In the non-autofocus mode, you can manually adjust the camera
focus. and the status is displayed at the bottom right of the
screen.
6 Camera Call Up& User-assignable keys
Press the shortcut keys F1-F6 to quickly call the corresponding
camera, you can also customize the key function according to
user requirements, the specific function is set inside the menu.
Seesaw button
Press the seesaw T button to pull the camera focus farther, and
press the seesaw W button to pull the camera focus closer, in
addition, you can also use the PTZ joystick to control the
camera zoom.and the status is displayed at the bottom right of
the screen.
Menu knob
Press the SETUP button to enter the controller menu .The menu
options can be selected by the knob. In non-menu mode, the
rotary knob is used to control the PTZ head rate and is
displayed in the lower right of the screen.
To Next Page
Loading...
Need help?
General