AVMATRIX SE1117 - Network Settings; Main Stream Settings

To Next Page

To Previous Page

3.2.3. Network Settings

The network can be set to dynamic IP (DHCP Enable) or static IP (DHCP Disable). The

default IP information can be checked in Part 3.1.

3.2.4. Main Stream Settings

The main stream can be set to mirror image and upside-down image from MAIN

PARAMETER tab. Configure main stream network protocol RTMP/ HTTP/ RTSP/

UNICAST/ MULTICAST/ RTP/ SRT accordingly. Please note that only one of HTTP/ RTSP/

UNICAST/ MULTICAST/ RTP can be enable at same time.