18 Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide
To configure a pluggable device:
1. Select Application Settings - Pluggable Devices in the Web Manager. The Pluggable Devices
content area is displayed and all mounted pluggable devices are shown.
2. Click on the pluggable device name. The page for the pluggable device type is displayed.
3. Configure the pluggable device parameters.
NOTE: PC card and USB storage devices are automatically configured.
To eject a pluggable device:
CAUTION: Always use the Web Manager to eject a pluggable device. Any other method may cause a kernel
panic.
1. Select Application Settings - Pluggable Devices in the Web Manager. The Pluggable Devices
content area is displayed and all mounted pluggable devices are shown.
2. Select the checkbox next to the pluggable device name you want to eject, then click Eject.
3. Remove the pluggable device by removing the PC card from the slot or the USB device from
the USB port.
To Next Page
Loading...
