EasyManua.ls Logo

Avocent CPS1610 User Manual

Avocent CPS1610
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CPS810
CPS1610
Installer/User Guide
For Technical Support:
Avocent Corporation
4991 Corporate Drive
Huntsville, Alabama 35805-6201 USA
Tel: +1 256 430 4000
Fax: +1 256 430 4031
590-187-001H
Avocent International Ltd.
Avocent House, Shannon Free Zone
Shannon, County Clare, Ireland
Tel: +353 61 715 292
Fax: +353 61 471 871
Avocent Asia Pacic
Singapore Branch Ofce
100 Tras Street, #15-01
Amara Corporate Tower
Singapore 079027
Tel: +656 227 3773
Fax: +656 223 9155
Avocent Germany
Gottlieb-Daimler-Straße 2-4
D-33803 Steinhagen
Germany
Tel: +49 5204 9134 0
Fax: +49 5204 9134 99
Avocent Canada
50 Mural Street, Unit 5
Richmond Hill, Ontario
L4B 1E4 Canada
Tel: +1 877 992 9239
Fax: +1 877 524 2985
Email: support@avocent.com
www.avocent.com
CPS

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Avocent CPS1610 and is the answer not in the manual?

Avocent CPS1610 Specifications

General IconGeneral
BrandAvocent
ModelCPS1610
CategoryNetwork Hardware
LanguageEnglish

Summary

Chapter 1: Product Overview

Features and Benefits

Details the advantages and capabilities of the CPS serial over IP network appliance.

Chapter 2: Installation and Configuration

Installing the CPS Network Appliance

Provides step-by-step instructions for physically installing the CPS appliance hardware.

Configuring the CPS Appliance

Details the process of configuring the CPS network appliance, including network addresses.

Chapter 3: Operations

Configuring Serial Port Settings

Explains how to configure CPS ports for console or SPC target devices.

Connecting to Serial Devices

Describes methods for connecting to attached serial devices via Telnet, CLI, PPP, and SSH.

Managing User Accounts

Covers adding, deleting, setting, and unlocking user accounts for the CPS appliance.

Chapter 4: Using CPS Appliance Commands

Accessing the CLI

Explains the three methods for accessing the Command Line Interface (CLI).

Chapter 5: CPS Appliance Commands

Port Set command

Changes serial port settings like baud rate, parity, and flow control.

Server Commands

Details commands for managing appliance configuration, network, SNMP, and security.

Related product manuals