Avocent CPS1610 - Show Port Alert Command; Show Port In|Out Command; Show Server Command

64 CPS Installer/User Guide
Show Port Alert command
The Show Port Alert command displays a port’s alert strings.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW PORT <port> ALERT
Show Port In|Out command
The Show Port In|Out command displays the translation settings for all ports. These translation
settings indicate how carriage returns and linefeeds are treated in incoming and outgoing serial data.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW PORT IN|OUT
Show Server command
The Show Server command displays CPS appliance configuration information and statistics.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER
Wake Wakeup state for socket (from SPC command).
ON Min Minimum On time (from SPC command).
OFF Min Minimum Off time (from SPC command).
Table 5.27: Show Port Command Display Fields for SPC Ports (Continued)
Field Content
Table 5.28: Show Port Alert Command Parameter
Parameter Description
<port> Port number in the range 1-8 for a CPS810 appliance or 1-16 for a CPS1610 appliance.
Table 5.29: Show Server Command Display Fields
Field Content
Server IP address (from initial configuration or Server Set command).