Avocent CPS1610 User Manual

62 CPS Installer/User Guide
Show Commands
The Show command has several forms, as listed in Table 5.24.
Show Port command
The Show Port command displays configuration and status information about one or all ports.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW PORT [<port>|ALL|NAMES]
The SHOW PORT NAMES command display includes the port numbers and names. If a port has
not been given a name with a Port Set command, the default name is displayed. A default name
contains the last three octets of the MAC address plus the port number.
Table 5.24: Show Command Summary
Command Description
Show Port Displays configuration information and statistics for one or all ports.
Show Port Alert Displays port alert strings.
Show Port In/Out Displays how carriage returns and linefeeds are treated.
Show Server Displays CPS configuration information and statistics.
Show Server CLI Displays CPS CLI settings.
Show Server PPP Displays CPS PPP settings.
Show Server RADIUS Displays CPS RADIUS settings.
Show Server Security Displays CPS authentication, connection and security lock-out settings.
Show Server SNMP Displays SNMP configuration information.
Show User Displays user configuration and session information.
Table 5.25: Show Port Command Parameter
Parameter Description
<port>
Either a port number in the range 1-8 for a CPS810 appliance or 1-16 for a
CPS1610 appliance, ALL to display information about all ports or NAMES to display
only port names.
Default = your port

Avocent CPS1610 Specifications

General

Brand	Avocent
Model	CPS1610
Category	Network Hardware
Language	English