Chapter 3: Operations 33
PORT <to_port> ALERT COPY <from_port>
At the confirmation prompt, press
Y to confirm or N to cancel. When the copy operation
occurs, all previously defined strings on the port being copied to will be replaced.
For more information, see Port Alert Add command on page 45, Port Alert Copy command on
page 45 and Port Alert Delete command on page 46.
To display SNMP configuration information:
Issue a Show Server SNMP command.
SHOW SERVER SNMP
The display includes information specified with the Server SNMP, Server SNMP Community,
Server SNMP Manager, Server SNMP Trap and Server SNMP Trap Destination commands.
For more information, see Show Server SNMP command on page 67.
To display port alert string information:
Issue a Show Port Alert command, specifying a port number.
SHOW PORT <port> ALERT
The display lists all the port’s defined alert strings.
For more information, see Show Port Alert command on page 64.
To Next Page
Loading...
