40 LongView® IP KVM Extenders Installer/User Guide
2. Press 7 to access the Appliance Information menu and press Enter.
Figure 3.18: Appliance Information Menu
3. Press 1 to access the Receiver Appliance Information Menu and press Enter. Values on the
Receiver Appliance Information Menu are read-only.
NOTE: The term “receiver appliance” is used interchangeably with “user station.”
Figure 3.19: Receiver Appliance Information Menu
To view transmitter system information:
1. Press Enter to display the serial menu.
2. Press 2 to access the Transmitter Main Menu and press Enter. If the password option is
enabled, you will be prompted for a password.
3. Press 6 to access the Appliance Information Menu and press Enter.
4. Press 1 to access the Transmitter Appliance Information Menu and press Enter. Values on the
Transmitter Appliance Information Menu are read-only.
To Next Page
Loading...
