Avocent LONGVIEW - Preferred Monitor Resolutions (EDID Preferred Timing)

42 LongView® IP KVM Extenders Installer/User Guide
3. Press 1 to access the Target Video Menu and press Enter.
Figure 3.21: Transmitter Target Video Menu
4. Press 1 to select DVI Normal and press Enter.
5. Configure video input settings as appropriate.
6. Type 0 (zero) and press Enter to save your changes and exit the menu. The unit resets.
Preferred monitor resolutions (EDID preferred timing)
The LVIP-T and LVIPDH-T transmitters can be configured to prefer certain monitor resolutions.
To configure preferred monitor resolutions:
1. Press 2 on the serial menu to access the Transmitter Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
2. Press 7 to access the Console Settings Menu and press Enter. The Console Settings Menu will
display.
3. Press 7 to access the Advanced Video Settings Menu.