Chapter 3: Operations 45
2. Press 8 to access the Console Settings Menu. Your currently selected OSD hotkey sequence is
displayed beside menu item 1.
Figure 3.25: Receiver Console Settings Menu
3. Press 1 to access the OSD Hotkey Menu and press Enter. The OSD Hotkey Menu will appear.
This menu shows you the hotkey sequences that you can choose from. The current hotkey
sequence is indicated by an asterisk symbol (*).
Figure 3.26: OSD Hotkey Menu
4. Type the number that corresponds to the hotkey sequence you wish to apply and press Enter.
5. To confirm your selection and exit the screen, type 0 (zero) and press Enter.
OSD Inactivity Time-out
By default, the user station is configured to dismiss the OSD after an inactivity period of 10
minutes. To reactivate the OSD, you must enter a valid OSD hotkey sequence.
To Next Page
Loading...
