Chapter 4: Share Mode 53
To enable Share Mode on the transmitter:
1. From the user station’s serial menu, press 2 to access the Transmitter Main Menu and press
Enter. If the password option is enabled, you will be prompted for a password.
2. Press 7 to access the Console Settings Menu and press Enter. The Console Settings Menu will
display.
3. Press 8 to access the Share Mode menu.
4. To enable or disable Share Mode, select option 1 and toggle back and forth.
5. Press 0 (zero) to exit and apply changes.
To enable Share Mode on the user station:
1. From the serial menu, press 1 to access the Receiver Main Menu and press Enter. If the
password option is enabled, you will be prompted for a password.
2. Press 8 to access the Console Settings Menu and press Enter. The Console Settings Menu will
display.
3. Press 11 to access the Share Mode menu.
4. Press 1 to select the connection type.
5. To enable or disable Share Mode, select option 2.
6. Press 0 (zero) to exit and apply changes.
To Next Page
Loading...
